40
[1920 x 1080 24bit Dual].
South Bridge
Press [Enter] to set south bridge parameters.
USB Configuration
Press [Enter] to make settings for the following sub-items:
USB Configuration
USB 3.0 Support
The optional settings are: [Enabled]; [Disabled]; [Auto]; [Smart Auto].
* Note: When set as [Disable], USB 2.0 Support is applicable, for user to make
further settings.
USB 3.0 Link Power Management
The optional settings are: [Enabled]; [Disabled].
* Note: This item only show up when ‘USB 3.0 Support’ set as [Enabled], [Auto] or
[Smart Auto].
USB 2.0 Support
The optional settings are: [Auto]; [Disabled].
Audio Controller
The optional settings are: [Disabled]; [Enabled]
Azalia HDMI Codec
Use this item to enable or disable internal HDMI codec for Azalia.
The optional settings are: [Disabled]; [Enabled].
PCI-E Slot Speed
The optional settings are: [Auto]; [Gen2]; [Gen1].
Onboard Lan1 Controller
The optional settings are: [Enabled]; [Disabled].
Mini PCIE
The optional settings are: [Enabled]; [Disabled].
Speed
The optional settings are: [Auto]; [Gen2]; [Gen1].
System State after Power Failure
Use this item to select AC power state when power is re-applied after a power
