37
Use this item to set maximum time the device will take before it properly reports
itself to the host controller.
The optional settings: [Auto]; [Manual].
‘Auto’ uses default value: for a root port it is 100 ms, for a hub port the delay is
taken from hub descriptor.
Select [Manual] you can set value for the following sub-item: ‘
Device Power-up
Delay in Seconds’.
Device Power-up Delay in Seconds
The delay range is from [1] to [40] seconds, in one second increments.
►
Intel(R) I211 Gigabit Network Connection-XX:XX:XX:XX:XX:XX/ Intel(R) I211
Gigabit Network Connection-XX:XX:XX:XX:XX:XX
These items show current network brief information.
3-8 Chipset Menu
►
Uncore Configuration
Press [Enter] to make settings for the following sub-items:
