32
SATA
Port
The optional settings: [Disabled]; [Enabled].
Use this item to enable or disable each SATA port.
Hot Plug
The optional settings: [Disabled]; [Enabled].
M.2
Port
The optional settings: [Disabled]; [Enabled].
Use this item to enable or disable device connected to M.2 SATA slot.
PCH-FW Configuration
Press [Enter] to view ME information and make settings in the following sub-items:
Firmware Update Configuration
Press [Enter] to make settings for ‘
ME FW Image RE-Flash
’.
ME FW Image Re-Flash
Use this item to enable or disable ME FW Image Re-Flash function.
The optional settings: [Disabled]; [Enabled].
*Note: In the case that user needs to update ME firmware, user should set ‘ME FW
Image Re-Flash’ as [Enabled], save the settings and exit. The system will turn off
and reboot after 4 seconds. If the user goes to BIOS screen again will find this item
is set again as [Disabled], but user can still re-flash to update firmware next time.
Trusted Computing
Press [Enter] to enable or disable ‘
Security Device Support
’.
Security Device Support
Use this item to enable or disable BIOS support for security device. TCG EFI
protocol and INT1A interface will not be available.
The optional settings: [Disabled]; [Enabled].
Pending Operation
Use this item to schedule an operation for the Security Device.
The optional settings: [None]; [TPM Clear].
