27
►
H/W Monitor
Press [Enter] to view current hardware health status, make further settings in
‘CPUFAN Smart Mode’ and ‘GPUFAN1 Smart Mode’.
CPUFAN Smart Mode/GPUFAN1 Smart Mode
The optional settings are: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:
CPUFAN / GPUFAN1 Full-Speed Temperature
Use this item to set CPUFAN/GPUFAN1 full speed temperature. Fan will run at full
speed when above this pre-set temperature.
CPUFAN / SYSFAN Idle-Speed Temperature
Use this item to set CPUFAN/GPUFAN1 idle speed temperature. Fan will run at
idle speed when below this pre-set temperature.
►
CPU Configuration
Press [Enter] to view current CPU configuration and make settings for the following
sub-items:
Intel Virtualization Technology
The optional settings: [Enabled]; [Disabled].
When set as [Enabled], a VMM can utilize the additional hardware capabilities
provided by Vanderpool Technology.
Hardware Prefetcher
Use this item to turn on/off the MLC streamer prefecher.
The optional settings: [Disabled]; [Enabled].
Adjacent Cache Line Prefetch
Use this item to turn on/off prefeching of adjacent cache lines.
The optional settings: [Disabled]; [Enabled].
Intel(R) SpeedStep(tm)
This item allows more than two frequency ranges to be supported.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], user can make further settings in ‘Turbo Mode’.
Turbo Mode
Use this item to enable or disable Turbo Mode.
The optional settings: [Disabled]; [Enabled].
