31
Press [Enter] to make settings in the following sub-items:
Security Device Support
Use this item to enables or disables BIOS support for security device. O.S. will not
show security device. TCG EFI protocol and INT1A interface will not be available.
The optional settings: [Disabled]; [Enabled].
ACPI Settings
Press [Enter] to make settings for the following sub-items:
ACPI Settings
ACPI Sleep State
Use this item to select the highest ACPI sleep state the system will enter when the
SUSPEND button is pressed.
The optional settings are: [Suspend Disabled]; [S3 (Suspend to RAM)].
Super IO Configuration
Press [Enter] to make settings for the following sub-items:
Super IO Configuration
Serial Port 1 Configuration
Press [Enter] to make settings for the following items:
Serial Port
Use this item to enable or disable serial port (COM).
The optional settings: [Disabled]; [Enabled].
Change Settings
Use this item to select an optimal setting for super IO device.
The optional settings are: [Auto]; [IO=3F8h; IRQ=4]; [IO=2F8h; IRQ=3]; [IO=3E8h;
IRQ=4]; [IO=2E8h; IRQ=3];
Transmission Mode Select
The optional settings are: [RS422]; [RS232]; [RS485]
Mode Speed Select
Use this item to RS232/RS422/RS485 Speed Select
The optional settings: [RS232/RS422/RS485=250Kbps]; [RS232=1Mbps,
RS422/RS485=10Mbps].
Serial Port 2 Configuration
Press [Enter] to make settings for the following items:
