36
When set as
[Enabled]
, user can make further settings in the following items:
Device Settings
Change Settings
Use this item to select an optimal setting for Super IO Device.
The optional settings are: [Auto]; [IO=3F8h; IRQ=11;]; [IO=2F8h; IRQ=11];
[IO=3E8h; IRQ=11]; [IO=2E8h; IRQ=11]; [IO=2F0h; IRQ=11]; [IO=2E0h; IRQ=11].
ERP Support
Use this item to set Energy-Related Products function.
The optional settings are: [Disabled]; [Enabled].
This item should be set as [
Disabled
] if you wish to have all active wake-up
functions.
Case Open Detect
Use this item to detect Case has already open or not. Show message in POST.
The optional settings are: [Disabled]; [Enabled].
When set as
[Enabled]
, system will detect if COPEN has been short or not (
refer
to JPCLR1 jumper setting for Case Open Detection
); if Pin 7&8 of
JPCLR1
are
short, system will show Case Open Message during POST.
WatchDog Reset Timer
Use this item to enable or disable WDT reset function.
The optional settings: [Disabled]; [Enabled].
When set as
[Enabled]
, the following sub-items shall appear:
WatchDog Reset Timer Value
User can select a value in the range of [4] to [255] seconds when ‘WatchDog
Reset Timer Unit’ set as [Sec]; or in the range of [4] to [255] minutes when
‘WatchDog Reset Timer Unit’ set as [Min].
WatchDog Reset Timer Unit
The optional settings: [Sec.]; [Min.].
WatchDog Wake-up Timer
This item support WDT wake-up while
‘
ERP Support
’ is set as [Auto].
The optional settings: [Disabled]; [Enabled].
When set as
[Enabled]
, the following sub-items shall appear:
WatchDog Wake-up Timer Value
