manualshive.com logo in svg

JETWAY JNF711-2807, Technical Manual

Share
Download
JETWAY JNF711-2807 Technical Manual Download Page 37

 
 
 

 

                                                                                                                                                                                                                                                                                                                                                                                                   

 
 
 

 

32 

USB Configuration   
USB 3.0 Support 
This item is for user to select mode of operation of XHCI controller. 
The optional settings are: [Enabled]; [Auto]; [Disabled]. 
USB 2.0 Support 
This  item  is  for  user  to  control  the  USB  EHCI  (USB2.0)  functions.  One  EHCI 
controller must always be enabled. 
The optional settings are: [Enabled]; [Disabled]. 
System state after Power Failure 
Use this item to select AC power state when ACpower is re-applied after a power 
failure. The optional settings are: [Always Off]; [Always On]; [Former State]. 
*Note:[Always  On]  and  [Former  State]  options  are  affected  by  ERP  function. 
Please disable ERP to support [Always On] and [Former State]. 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for JNF711-2807










































Reviews:

No comments

Brands by name

Popular brands

Load more brands