26
SATA Configuration
Press [Enter] to make settings for the following sub-items:
SATA Configuration
SATA Port
The optional settings: [Disabled]; [Enabled].
Use this item to enable or disable Serial ATA port.
SATA Speed Support
The item is for user to set the maximum speed the SATA controller can support.
The optional settings are: [Gen1]; [Gen2].
SATA ODD Port
The optional settings are: [Port0 ODD]; [Port1 ODD]; [No ODD].
SATA Mode
The optional settings are: [IDE Mode]; [AHCI Mode].
SATA HDD1
The optional settings are: [Enabled]; [Disabled].
Use this item to enable or disable SATA Port.
SATA HDD1 HotPlug
The optional settings are: [Enabled]; [Disabled].
Use this item to enable or disable support for SATA Port HotPlug function.
SATA Port 2
The optional settings are: [Enabled]; [Disabled].
Use this item to enable or disable SATA Port.
SATA Port2 HotPlug
The optional settings are: [Enabled]; [Disabled].
Use this item to enable or disable support for SATA Port2 HotPlug function.
Network Stack Configuration
Press [Enter] to go to ‘
Network Stack
’ screen to make further settings.
Network Stack
Use this item to enable or disable UEFI network stack.
The optional settings are: [Enabled]; [Disabled].
When set as [Enabled], the following sub-items shall appear:
Ipv4 PXE Support
The optional settings are: [Disabled]; [Enabled].
Use this item to enable Ipv4 PXE Boot Support. When set as [Disabled], Ipv4 boot
