18
•
Two hard disks can be connected to each connector. The first HDD is referred to as
the “Master” and the second HDD is referred to as the “Slave”.
•
For performance issues, we strongly suggest you don’t install a CD-ROM or DVD-
ROM drive on the same IDE channel as a hard disk. Otherwise, the system performance
on this channel may drop.
(12) IDE RAID Connectors : IDE3/IDE4 (Only for I406R)
When JP14 setting 1-2 closed IDE3/IDE4 are setting in ATA 100 Mode for Normal
extra IDE Interface. When JP14 setting 2-3 closed IDE3/IDE4 can setting RAID
Mode for stripping capable to increase transfer rate, or RAID 1 Mode for mirroring
capable for data protection. For more detail description please read PROMISE.DOC
in CD-PACK X:\MANUAL\PROMISE.DOC file.
IDE RAID Connectors
Pin 1
Pin 1
IDE3
IDE4
2-6-2 Headers
(1) Line-In/Out, MIC Header (9-pin): AUDIO
This header connect to Front Panel Line-In, Line-out, MIC connector with cable.
Line-In/Out, MIC Headers
AUDIO
Pin 1
L-IN-L
L-OUT-L
GND
MIC
L-IN-R
L-OUT-R
GND
GND
MICP
