38
This section is for setting CPU Frequency/Voltage Control.
CMOS Setup Utility – Copyright(C) 1984-2001 Award Software
Miscellaneous Control
Item Help
CPU Clock Ratio X 8
Auto Detect PCI Clk Enabled
Spread Spectrum Disabled
** Current Host/PCI Clock is 100/33MHz **
Host/PCI clock at Next Boot is 100/33MHz
** Current DRAM Clock is 133MHz **
DRAM Clock at Next Boot is 133MHz
PCI Clock Ratio Host/3
Flash Part Write Protect Enabled
Menu Level >
↑↓→←
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Auto Detect PCI Clk
This item allows you to enable/disable auto detect PCI Clock.
The settings are: Enabled, Disabled.
Spread Spectrum
This item allows you to set the CPU Host/PCI clock and Spread Spectrum.
The settings are: Enabled, Disabled.
Host/PCI Clock at Next Boot is
This item allows you to select CPU (Host) frequency step by step increasing
The choice are: 100MHz
∼
200MHz
DRAM Clock at Next Boot is
This item allows you select DRAM Clock value. The choice are 100MHz, 133MHz.
PCI Clock Ratio
This item allows you select PCI Clock. The choice are Host/3, Host/4, Host/5, Host/6.
Flash Part Write Protect
This item allow you protect your BIOS chip from Virus destroy data. When Flash BIOS you
have Disabled this item
3-12 Load Standard/Optimized Defaults
