20
3. Insert the gold-figure side of the
compatible M.2 B-key type-3052 card
into the slot.
4. Secure the card to the board by
tightening up the screw to the marked
spot.
For type-6570 card installation:
Push compatible M.2 B-Key type-6570 card into M2B slot until the golden-figure side
fully emerged into the slot, and then secure it by tightening the screws at locations
MH3 & MH4.
*Note
: In the case that compatible M2B card comes with metal buttons to be connected
with antenna strings, user needs to dissemble the whole heat sink on the back of the Panel
PC and pick out the antenna string from hidden cable buddle
(please refer to 2-4-3)
. The
installation steps for M2E card and M2B card are basically the same.
(For illustration only)
MH4
MH3
*Metal Buttons
(Connected to antenna string)
