13
2-4 Hardware Installation
Remove the screws that lock the back cover to the system from the back side before
hardware installation procedures (refer to 2-2).
2-4-1 To Install MSATA Card
1.
Locate the full-size MSATA slot on the
board.
2.
Remove the marked screw and use it to
lock MSATA card to the slot in later
installation.
3.
Insert the gold-figure side of the
compatible MSATA card into the slot at a
30 degree angle and press down.
4.
Lock the card to the board by tightening
up the screw to the marked spot.
