19
5. Turn over the system on a flat operation
platform and lock Part-B to Part-A by
tightening the 2 screws in the marked
spots.
6. Fastening the USB device cable by
tightening up the other screw in the
marked spot.
2-4-5 To Install Optional Chassis Fixed Parts
1. Insert corresponding edges of the fixed
part into the slots until them matched.
Make sure the fixed part is installed in the
way the photo shows, with protruding tips
upwards.
2. The models that support this fixing mode
have pairs of slots reserved on both sides
of the system. User can choose the
height or position of installing spot.
3. Insert corresponding edges of the fixed part into the slots until them matched. Tightening
up the screw so that the fixed part can be fitted into the slots tightly. Install other fixed
parts to the system in the same way.
*Note:1. Fixed parts are only optional for specific models. Please refers to the
actual prodcut for speficication; 2. The photos in the manual is for illutration purpose
only. If there are any diferences between the photos and the actual product, please
refer to the actual product.
