28
Suspend mode
Use this item to select the ACPI state used for system suspend. The optional settings
are: S1 (POS); S3 (STR).
Power On by PCIE (WOL)/ Keyboard/ Mouse
The optional settings are: Enabled; Disabled.
3-9 Miscellaneous
Control
Clear NVRAM
Clear NVRAM during System Boot. The optional settings are: No; Yes.
Plug &Play O/S
The optional settings are: No; Yes.
No: Let the BIOS configure all the devices in the system.
Yes: Let the operating system configure Plug and Play devices, not required for boot if
your system has a Plug and Play operating system.
PCI Latency Timer
Value in units of PCI clocks for PCI device latency timer register.
Allocate IRQ for PCI VGA
The optional settings are: No; Yes.
Yes: Assigns IRQ to PCI VGA card if card requests IRQ.
No: Does not assign IRQ to PCI VGA card even card requests an IRQ.
Palette Snooping
The optional settings are: Enabled; Disabled.
Enable: inform the PCI device that an ISA graphics devices is installed in the system
so the card will function correctly.
PCI IDE Bus Master
The optional settings are: Enabled; Disabled.
Enable: BIOS uses PCI busmastering for reading/writing IDE devices.
IRQ Resources
Press Enter and set values in the sub-items asIRQ5, IRQ9, IRQ10,IRQ11, IRQ14 and
IRQ15.
