JETWAY 945PDG User Manual Download Page 34

 
 
 
                                                                                                                                                                                                                                                                                                                                                         

 
 
 

31 

This entry for setting Supervisor password and User password 

Load Optimized Defaults 

Use this menu to load the BIOS default values these are setting for optimal performances system 
operations for performance use.

 

Load Standard Defaults 

Use this menu to load the BIOS default values for the stable performance system operation 
that are factory settings for normal use. 

Save & Exit Setup 

Save CMOS value changes to CMOS and exit setup. 

Exit Without Saving 

Abandon all CMOS value changes and exit setup. 
 

3-4  Standard CMOS Features 

The items in Standard CMOS Setup Menu are divided into several categories.  Each category 
includes no, one or more than one setup items.  Use the arrow keys to highlight the item and 
then use the <PgUp> or <PgDn> keys to select the value you want in each item. 

Phoenix – AwardBIOS CMOS Setup Utility  

Standard CMOS Features 

 

Item Help 

 

    Date (mm:dd:yy)             The, OCT, 10 2005 
    Time (hh:mm:ss)             11 : 02 : 35 

  > IDE Channel 0 Master        None  
  > IDE Channel 0 Slave         None 
  > IDE Channel 1 Master        None 
  > IDE Channel 1 Slave         None 

    Drive A                     1.44M, 3.5 in.  
    Video                       EGA/VGA 
    Halt On                     All Errors 

    Base Memory                     640K 
    Extended Memory               56320K 
    Total Memory                  57344K 
 

 
  Menu Level > 
 
  Change the day, month, 
  year and century 
 

↑↓→←

 Move Enter:/-/PU/PD:Value F10:Save ESC:Exit  F1:General Help 

F5:Previous Values   F6:Optimized Defaults    F7:Standard Defaults 

Date 

The date format is <day><month><date><year>.  

Day

 

  Day of the week, from Sun to Sat, determined by BIOS. Read-only. 

Month

   The month from Jan. through Dec. 

Date  

 

The date from 1 to 31 can be keyed by numeric function keys. 

Year

    The year depends on the year of the BIOS.   

 

Time 

The time format is <hour><minute><second>.  

IDE Channel 0 Master / Channel 0 Slave / Channel 1 Master / Channel 1 Slave 
SATA Channel 1, 2, 3, 4 

Summary of Contents for 945PDG


































































Reviews: