10
This motherboard provides
four
184-pin DDR DUAL INLINE MEMORY MODULES
(DIMM) sites for DDR memory expansion available from minimum memory size of 64MB to
maximum memory size of 4.0GB DDR SDRAM.
Valid Memory Configurations
Bank
184-Pin DIMM
PCS
Total Memory
Bank 0, 1 (DIMM1)
DDRDDR266/DDR333/DDR400
DDR SDRAM Module
X1
128MB
∼
1.0GB
Bank 2, 3 (DIMM2)
DDRDDR266/DDR333/DDR400
DDR SDRAM Module
X1
128MB
∼
1.0GB
Bank 4, 5 (DIMM3)
DDRDDR266/DDR333/DDR400
DDR SDRAM Module
X1
128MB
∼
1.0GB
Bank 6,7 (DIMM4) DDRDDR266/DDR333/DDR400
DDR SDRAM Module
X1
128MB
∼
1.0GB
Total
System Memory (Max. 4.0GB)
4
128MB
∼
4.0GB
For Dual channel Limited!
1.
Dual channel function only supports when 2 DIMM Modules plug in either both DIMM1 &
DIMM2 or DIMM3 &DIMM4, or four DIMM Modules plug in DIMM1~DIMM4.
2.
DIMM1 & DIMM2, or DIMM3 & DIMM4 must be the same type, same size, same frequency
for dual channel function.
Generally, installing DDR SDRAM modules to your motherboard is very easy, you can refer
to figure 2-4 to see what a 184-Pin DDR266/DDR333/DDR400 DDR SDRAM module looks
like.
DI
M
M
2 (
BANK2+BANK3)
DI
M
M
1 (
BANK0+BANK1)
DI
M
M
4 (
BANK6+BANK7)
DI
M
M
3 (
BANK4+BANK5)
DIMM1 & DIMM2: Dual Channel 1
DIMM3 & DIMM4: Dual Channel 2
NOTE!
When you install DIMM module fully into the DIMM socket the eject tab
should be locked into the DIMM module very firmly and fit into its
indention on both sides.
WARNING!
For the DDR SDRAM CLOCK is set at 200MHz, use only DDR400- compliant
DDR Modules. When this motherboard operate at 200Mhz, most system will
not even boot if non-compliant modules are used because of the strict
Figure 2-4
