This motherboard provides
four
184-pin DDR DUAL INLINE MEMORY MODULES
(DIMM) sites for DDR memory expansion available from minimum memory size of 128MB
to maximum memory size of 4.0GB DDR SDRAM.
Valid Memory Configurations
Bank
184-Pin DIMM
PCS
Total Memory
Bank 0, 1 (DIMM1)
DDR266/DDR333/DDR400
X1
128MB
1.0GB
Bank 2, 3 (DIMM2)
DDR266/DDR333/DDR400
X1
128MB
1.0GB
Bank 4, 5 (DIMM3)
DDR266/DDR333/DDR400
X1
128MB
1.0GB
Bank 6,7 (DIMM4)
DDR266/DDR333/DDR400
X1
128MB
1.0GB
Total
System Memory (Max. 4.0GB)
4
128MB
4.0GB
Recommend DIMM Module Combination
1.
One DIMM Module ----Plug in DIMM1
2.
Two DIMM Modules---Plug in DIMM1 and DIMM3 for Dual channel function
3.
Four DIMM Modules---Plug in DIMM1/DIMM2/DIMM3/DIMM4.
For Dual channel Limited!
4.
Dual channel function only supports when 2 DIMM Modules plug in either both DIMM1 &
DIMM3 or DIMM2 &DIMM4, or four DIMM Modules plug in DIMM1~DIMM4.
5.
DIMM1 & DIMM3, or DIMM2 & DIMM4 must be the same type, same size, same
frequency for dual channel function.
Generally, installing DDR SDRAM modules to your motherboard is very easy, you can refer
to figure 2-4 to see what a 184-Pin DDR266/DDR333/DDR400 DDR SDRAM module looks
like.
NOTE!
When you install DIMM module fully into the DIMM socket the eject tab
should be locked into the DIMM module very firmly and fit into its
indention on both sides.
WARNING!
For the DDR SDRAM CLOCK is set at 200MHz, use only DDR400- compliant
DDR Modules. When this motherboard operate at 200Mhz, most system will
10
Figure 2-4
