35
3-11 Miscellaneous Control
This section is for setting CPU Frequency/Voltage Control.
Phoenix – AwardBIOS CMOS Setup Utility
Miscellaneous Control
Item Help
Auto Detect PCI Clock Enabled
Spread Spectrum Disabled
Linear PCIExpress Clock 99
** Current CPU Clock 200Mhz **
CPU Clock at Next Boot 100
** Current DRAM Clock 200MHZ **
DRAM Clock at next Boot 200MHz(Auto)
CPU FID Select Default
CPU Vcore Select Default
Over Voltage Enabled
VDIMM Select 2.50V(Default)
SBChip VDD Select 2.55V(Default)
NBChip VDD Select 1.60V(Default)
CPU Vcore 7-Shift Normal
Flash Port Write Protect Enabled
Menu Level >
↑↓→←
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Auto Detect PCI Clock
This item allows you to enable/disable auto detect PCI Clock.
Spread Spectrum
This item allows you to set the CPU Host/PCI clock and Spread Spectrum.
The settings are: Enabled, Disabled.
DRAM Clock at next Boot is
This field displays the capability of the memory modules that you can use
VDIMM Select
This item allows you to select 2.5V of the DDR Module. The choice are: 2.55V, 2.6V, 2.65V,
2.7V.
VAGP Output
This item allows you to select 1.5V of the AGP 4X/8X VGA card. The choice are: 1.5V, 1.6V,
1.7V, 1.8V.
VCC2.5 Voltage Select
This item allows you to select 2.5V of the VCC2.5V Voltage. The choice are: 2.55V, 2.6V,
2.65V, 2.7V.
CPU Vcore 7-Shift
This item allows you select the CPU Vcore Voltage 50mV more than the standard value by
each step , by this function for the precise over-clocking for extra demanding of performance.
