JETWAY 911BF, User Manual

Page: 8 / 48

JP12
CPU Bus Frequency Selection
1-2 :100MHZ , 2-3:66MHz p. 6
JP14 V I/O Voltage 1- 2 :For V I/O 3.45V (Default)
3-4 :For V I/O 3.52V
p.7
JP1
Keyboard Power on Function (K.B.Voltage)
1-2 : 5VSB for ATX Power Supply
2-3 : VCC
p. 8
JP5
Clear Keyboard Power On Password setting 1-2 Default ; 2-3 Clear Password
p. 7
JP4 Codec Master/Slave Mode Control 1-2 Master ; 2-3 slave p. 7
JP13 CMOS RAM Clear 1-2 Default for R.T.C. ; 2-3 Reset R.T.C. p. 6
Connectors
Connector Name Description Page
ATPOW AT Power Connector 12-Pin Block p.10
ATXPOW ATX power Connector 20-Pin Block p.10
ATKB Keyboard Connector 5-Pin Female p.10
MS_PIN PS/2 MouseConnector 6-Pin Block p.10
PRT Parallel Port Connector 26-Pin Block p.11
COM1,COM2 Serial Port COMA&COMB 10-Pin Block p.11
FDD1 Floppy Driver Connector 34-Pin Block p.11
IDE1 Primary IDE Connector 40-Pin Block p.11
IDE2 Secondary IDE Connector 40-Pin Block p.12
HDLED IDE activity LED 2-Pin Connector
p.12
FPC Front Panel Connector 16-Pin Block p.12
IR Infrared Module Connector 5-Pin Block p.13
USB PORT USB Port Connector 10-Pin Block p.13
FAN1,FAN2,FAN3 FAN Connector 1-2 12V Power Connector
2-3 ACPI FAN power control Connector
p.13
JP18(PS-ON)
ATX power button/Soft power bufton
2-pin Connector Connector p.13
VGA VGA Connector 16-pin Block p.13
Audio Port Audio connector 10-pin Connector p.14
Game Port Game port connector 16-pin connector p.14
J1 CD-Audio/ Sony 4-pin Block p.14
J2 CD-Audio/ Panasonic 4-pin Block p.14
WOL Wake On LAN 3-pin Block P.14
Expansion Sockets
Socket/Slot Name Description
DIMM1,DIMM2, DIMM Module Socket 168-Pins DIMM SDRAM Module Expansion Socket
Slot 1 CPU Slot Pentium II/III / Coppermine CPU Slot
Zip Socket370 CPU Socket Celeron PPGA / Coppermine FC-PGA CPU Socket
AMR1 AMR SLOT Modem Riser Card slot
PCI1, PCI2,PCI3 PCI Slot 32-bits PCI Local Bus Expansion slots
2-4 Installation Steps
Before using your computer, you must follow the steps as follows:
1. Set Jumpers on the Motherboard
2. Install the CPU
3. Install DRAM Modules
4. Install Expansion card
5