12
Pin 1
(3)
USB Port connector: USB1, UL_B (USB)
The connectors are 4-pin connector that connect USB devices to the system board.
(4)
LAN Port connector: LAN (for 865GDMCP/865PEDMCP)
This connector is standard RJ45 connector for Network connector.
(5)
PS/2 Mouse & PS/2 Keyboard Connector: KB (PS2 KB/MOUSE)
The connectors for PS/2 keyboard and PS/2 Mouse.
(6)
Parallel Port Connector (25-pin female): PARALLEL
Parallel Port connector is a 25-pin D-Subminiature Receptacle connector. The On-board
Parallel Port can be disabled through the BIOS SETUP. Please refer to Chapter 3 “INTEGRATED
PERIPHERALS SETUP” section for more detail information.
(7)
Audio Line-In, Lin-Out, MIC Connector : CN1
This Connector are 3 phone Jack for LINE-OUT, LINE-IN, MIC
Line-out :
Audio output to speaker
Line-in :
Audio input to sound chip
MIC :
Microphone
Connector
(8) VGA Connector (15-pin D-Sub) Connector: VGA (for 865GDMC/865GDMCP only)
VGA is the 15-pin D-Subminiature female connector for display monitor.
(9)
Serial Port COM1/COM2: COM1/COM2 (COM2 only for 865PEDMC/865PEDMCP)
COM1/COM2A is the 9-pin D-Subminiature mail connector. The On-board serial port can be
disabled through BIOS SETUP. Please refer to Chapter 3 “INTEGRATED PERIPHERALS
SETUP” section for more detail information.
(10) Floppy drive Connector (34-pin block): FDD
This connector supports the provided floppy drive ribbon cable. After connecting the single
plug end to motherboard, connect the two plugs at other end to the floppy drives.
LINE-OUT
LINE-IN
MIC
COM1
VGA/COM2
(Option)
PS/2 Keyboard
USB
USB1
PS/2 Mouse PRINT
LAN