15
(5) External Remote Control Connect Cable Header: JP5
JP5 is for connect External Remote Control, when plug out the connect cable you have
to insert the jumpers in 3-5, 7-9, 4-6, 8-10 otherwise the On board Keyboard and
Mouse will not work.
JP5
Pin 1
GND
KB
-DATA
MS
-DATA
EXT
-KB
-DATA
EXT
-MS
-DATA
VCC
KB
-CLK
MS
-CLK
EXT
-KB
-CLK
EXT
-MS
-CLK
2
9
10
(6)
Speaker connector: SPEAK
This 4-pin connector connects to the case-mounted speaker. See the figure below.
(7) IDE Activity LED: IDE LED
This connector connects to the hard disk activity indicator light on the case.
(8) Reset switch lead: RESET
This 2-pin connector connects to the case-mounted reset switch for rebooting your
computer without having to turn off your power switch. This is a preferred method of
rebooting in order to prolong the lift of the system’s power supply. See the figure
below.
(9) Power LED
: PWR-LED
The Power LED is light on while the system power is on. Connect the Power LED from the
system case to this pin.
(10) Power switch
: PWR BTN
This 2-pin connector connects to the case-mounted power switch to power ON/OFF the
system.
System Case Connections
SPEAK
SPKR
GND
NC
VCC5
Pin 1
FP
Pin 1
HDLED
RESET
VCC5
GND
VCC5
ACPILED
PWRBTN
PWRBTN
ACPILED
HDDLED
RSTSW
NC
GND
