12
(2) ATX 12V Power Connector (4-pin block) : ATX12V
This is a new defined 4-pins connector that usually comes with ATX Power Supply.
The ATX Power Supply which fully support Pentium 4 processor must including this
connector for support extra 12V voltage to maintain system power consumption.
Without this connector might cause system unstable because the power supply can not
provide sufficient current for system.
Pin 1
(3)
PS/2 Mouse & PS/2 Keyboard Connector: KB/MOUSE
The connectors for PS/2 keyboard and PS/2 Mouse.
(4)
USB Port connector: USB
The connectors are 4-pin connector that connect USB devices to the system board.
(5)
LAN Port connector: LAN
This connector is standard RJ45 connector for Network connector.
(6)
Parallel Port Connector (25-pin female): PARALL
Parallel Port connector is a 25-pin D-Subminiature Receptacle connector. The On-board
Parallel Port can be disabled through the BIOS SETUP. Please refer to Chapter 3
“INTEGRATED PERIPHERALS SETUP” section for more detail information.
(7)
Audio Connector : CN1
This Connector are 3 phone Jack for LINE-OUT, LINE-IN, MIC .
Line-out (Green):
Audio output to speaker for
Front Speaker output in 6-Channel
Line-in (Blue):
Audio input to sound chip or
REAR Speaker output in 6-Channel
MIC (Pink):
Microphone Connector or
Center/Base Speaker output in 6-Channel
(8) VGA Connector (15-pin D-Sub) Connector: VGA
VGA is the 15-pin D-Subminiature female connector for display monitor.
(9)
Serial Port2 COM2: COM_2
COM_2 is the 9-pin D-Subminiature mail connector. The On-board serial port can be
disabled through BIOS SETUP. Please refer to Chapter 3 “INTEGRATED PERIPHERALS
SETUP” section for more detail information.
(10) SPDIF-Out Optical Connector : OPT
Optical Transmitter Connector for SPDIF Speaker or SPDIF device .
PS/2
Keyboard
VGA
USB
PS/2
Mouse
SPDIF-OUT
6-Channel Speaker
LAN
Center/Base
REAR Speaker
Front Speaker
