background image

 
 
 
                                                                                                                                                                                                                                                                                                                                                         

 
 
 

 

23 

Time 
The time format is <hour><minute><second>.  
Primary Master/Primary Slave 
Secondary Master/Secondary Slave 
Press PgUp/<+> or PgDn/<

> to select Manual, None, Auto type.  Note that the 

specifications of your drive must match with the drive table.  The hard disk will not work 
properly if you enter improper information for this category.  If your hard disk drive type is 
not matched or listed, you can use Manual to define your own drive type manually. 
 
If you select Manual, related information is asked to be entered to the following items.  
Enter the information directly from the keyboard.  This information should be provided in 
the documentation from your hard disk vendor or the system manufacturer. 
If the controller of HDD interface is SCSI, the selection shall be “None”. 
If the controller of HDD interface is CD-ROM, the selection shall be “None” 
Access Mode 

The settings are Auto Normal, Large, and LBA. 

Cylinder   

number of cylinders 

Head  

 

number of heads 

Precomp   write 

precomp 

Landing Zone landing 

zone 

Sector 

 

number of sectors 

 

3-5   Advanced BIOS Features 

CMOS Setup Utility – Copyright(C) 1984-2002 Award Software 

Advanced BIOS Features 

 

Item Help 

 

   Anti-Virus Protection         Disabled  

   Recovery Genius               Enabled 

  

 

Hard Disk Boot Priority       Press Enter 

   CPU L1 &L2 Cache              Enabled 

   Quick Power On Self Test      Enabled 

   Hard Disk Boot Priority       Press Enter 

   First Boot Device             Floppy 

   Second Boot Device            Hard Disk 

   Third Boot Device             CDROM 

   Boot other Device             Enabled

 

   Swap Floppy Drive             Disabled 

   Boot Up Floppy Seek           Enabled 

   Boot Up NumLock Status        On 

   Gate A20 Option               Fast 

   Typematic Rate Setting        Disabled 

   Typematic Rate (Chars/Sec)    6 

   Typematic Delay (Msec)        250 

   Security Option               Setup 

   APIC Mode                     Disabled         

   MPS Version Control For OS    1.1 

   OS Select For DRAM > 64MB     Non-OS2 

   HDD S.M.A.R.T. Capability     Disabled 

 
  Menu Level > 
 
   
 
 

↑↓→←

 Move Enter:/-/PU/PD:Value F10:Save ESC:Exit  F1:General Help 

F5:Previous Values   F6:Optimized Defaults    F7:Standard Defaults 

Summary of Contents for 845EDAR1A

















































Reviews: