manualshive.com logo in svg

JETWAY 845EDA, User Manual, Page: 41 / 48

Share
Download
JETWAY 845EDA User Manual Download Page 41

 
 
 
                                                                                                                                                                                                                                                                                                                                                         

 
 
 

   

3.  Click Yes to Restart your computer after 

Driver Install Finish 

 

NOTE:   The path of the file: 

For Windows 95/98 is X:\PROMISE\ATA100\WIN95-98 (including Win95/98)  
For Windows ME is X:\PROMISE\ATA100\WINME 
For Windows 2000 is X:\PROMISE\ATA100\WIN2000 
For Windows NT4.0 is X:\PROMISE\ATA100\NT4 

 
4-3-2   Install PROMISE IDE RAID Controller Driver 

When the Jumper setting in RAID Mode you will have next screen in Magic Install MENU. 

   

 

1.  Click PROMISE RAID Controller Driver 

when MAGIC INSTALL MENU 

2.  Install PROMISE RAID Controller Driver  

   

NOTE:   The path of the file: 

For Windows 9X is X:\PROMISE\RAID\WIN9X-
ME (including Win95/98/ME) 

For Windows NT4.0 is X:\PROMISE\RAID\NT4 

For Windows 2000 is X:\PROMISE\RAID\WIN2000

For Novell Netware is 
X:\PROMISE\RAID\NETWARE 

 

3.  Click Yes to Restart your computer after 

Driver Install Finish 

 

 

39 

Summary of Contents for 845EDA

















































Reviews:

No comments