10
This motherboard provides
two
184-pin DUAL INLINE MEMORY MODULES
(DIMM) sites for memory expansion available from minimum memory size of 64MB
to maximum memory size of 2.0GB DDR SDRAM.
Valid Memory Configurations
Bank
184-Pin DIMM
Total Memory
Bank 0, 1 (DDR1)
DDR200/DDR266
DDR SDRAM Module
X1
64MB
∼
1.0GB
Bank 2, 3 (DDR2)
DDR200/DDR266
DDR SDRAM Module
X1
64MB
∼
1.0GB
Total
System Memory (Max. 2.0GB)
2
64MB
∼
2.0GB
NOTE!
Make sure the installed memory are DDR266 SDRAM support 133MHz
memory clock, otherwise the system may hang during startup.
Generally, installing DDR SDRAM modules to your motherboard is very easy, you
can refer to figure 2-4 to see what a 184-Pin DDR266/DDR200 DDR SDRAM
module looks like.
DDR
2 (
BAN
K2
+
BANK3
)
DDR
1 (
BAN
K0
+
BANK1
)
NOTE!
When you install DIMM module fully into the DIMM socket the eject tab
should be locked into the DIMM module very firmly and fit into its
indention on both sides.
WARNING!
For the DDR SDRAM CLOCK is set at 133MHz, use only DDR266-
compliant DDR Modules. When this motherboard operate at 133Mhz, most
system will not even boot if non-compliant modules are used because of the
strict timing issues, if your SDR Modules are not DDR266-compliant, set
the DDR SDRAM clock to 100MHz to ensure system stability.
2-5 Expansion Cards
Figure 2-4