background image

 
 
 
                                                                                                                                                                                                                                                                                                                                                         

 
 
 

 

43 

IDE : 

 

VIA ATAPI VENDOR SUPPORT DRIVER IS USED TO FIXED COMPATIBILITY 

ISSUE FOR IDE DEVICES 

AGPVXD : 

          

VIA AGPVXD DRIVER IS TO BE INSTALLED, IF YOU ARE USING AN 

AGP VGA CARD, VIAGART.VXD WILL PROVIDE SERVICE ROUTINES 

TO YOUR VGA DRIVER AND INTERFACE DIRECTLY TO HARDWARE, 

PROVIDING FAST GRAPHIC ACCESS 

IRQ ROUTING :

 

VIA PCI IRQ MINIPORT DRIVER IS TO BE INSTALLED UNDER WIN98 

ONLY, IT WILL FIX PCI IRQ ROUTING SEQUENCE 

INF : 

 

VIA REGISTRY DRIVER IS TO BE INSTALLED UNDER WINDOWS 

THE DRIVER WILL ENABLE VIA POWER MANAGERMENT 

CONTROLLER

 

 

       

 

1.

 

Click IDE when MAGIC INSTALL MENU 

appears 

2.

 

Click NEXT when VIA Service Pack Wizard  

appears 

 

       

 

3.

 

This is to announce the Copy Write, click 

NEXT 

4.

 

Click NEXT to choose all driver  

 

Summary of Contents for 694CS/VM4





















































Reviews: