background image

 
 
 
                                                                                                                                                                                                                                                                                                                                                         

 
 
 

 

24 

to communicate, it is the key factor for system stability, and in ensuring that your 
system performance as its best.    
 
In the BIOS Setup main menu of Figure 3-1, you can see several options.  We will 
explain these options step by step in the following pages of this chapter, but let us 
first see a short description of the function keys you may use here: 

• 

Press <Esc> to quit the BIOS Setup. 

• 

Press 

↑↓←→

 (up, down, left, right) to choose, in the main menu, the option you 

want to confirm or to modify. 

• 

Press <F10> when you have completed the setup of BIOS parameters to save 
these parameters and to exit the BIOS Setup menu. 

• 

Press Page Up/Page Down or +/

 keys when you want to modify the BIOS 

parameters for the active option.  

 
 

3-1   Entering Setup 

 

Power on the computer and by pressing <Del> immediately allows you to enter 
Setup.   
If the message disappears before your respond and you still wish to enter Setup, 
restart the system to try again by turning it OFF then ON or pressing the “RESET” 
button on the system case. You may also restart by simultaneously pressing <Ctrl>, 
<Alt> and <Delete> keys.  If you do not press the keys at the correct time and 
the system does not boot, an error message will be displayed and you will again be 
asked to  
 

Press <F1> to continue, <Ctrl-Alt-Esc> or <Del> to enter Setup 

 
 
3-2   Getting Help 

 

Main Menu 

The on-line description of the highlighted setup function is displayed at the bottom of 
the screen.   

Status Page Setup Menu/Option Page Setup Menu 

Press F1 to pop up a small help window that describes the appropriate keys to use and 
the possible selections for the highlighted item.  To exit the Help Window, press 
<Esc>. 

 

Summary of Contents for 635CSR1A
























































Reviews: