Jetter JVM-407B-HMI, User Manual

Page: 73 / 300

Jetter AG 73
JVM-407B Mounting and installation of the JVM-407B
4.5 IP configuration
This chapter covers the IP configuration for the HMI JVM-407B. The following
parameters can be set:
 IP address of the HMI

Subnet mask
 IP address of default gateway
 IP address of DNS server

HMI name
 IP port number for the JetSym debugger
 Basic port number for communication via JetIP
To carry out the IP configuration of the JVM-407B, knowledge of IP networks
is required, such as
 IP addressing (IP address, port number, subnet masks etc.)
Topic Page
Factory settings ............................................................................................ 74
The configuration memory ............................................................................ 75
Configuration registers ................................................................................. 76
Setting the IP address during runtime .......................................................... 77
Making settings on the device web site ........................................................ 78
Introduction
Required engineer's
skills
Contents