Jetter JVM-407B-HMI, User Manual

Page: 55 / 300

Jetter AG 55
JVM-407B Mounting and installation of the JVM-407B
4.2 Interfaces on the center console with mounted
support arm
If the JVM-407B is mounted on the support arm, the connection cables are
already installed in the support arm.
This chapter covers the connector types and their pin assignment to connect
the support arm to the center console.
The following connection cables are installed in the support arm:
 Power supply
 Digital I/Os

CANopen® interfaces
 Video
Topic Page
Connecting the power supply in the case of a mounted support arm .......... 56
Connecting digital inputs/outputs in the case of a mounted support arm ..... 57
CANopen® bus connection in the case of a mounted support arm ............. 59
Connecting the video signal in the case of a mounted support arm ............ 61
Interconnecting cable to
the center console
Contents