Jetter JVM-407B-HMI, User Manual

Page: 256 / 300

256 Jetter AG
11 Automatic copying of controller data
File format
The data file consists of the following elements:
 Pure text file
 Each entry must be in a separate line of text

Each line must be terminated by carriage return/line feed
 Comment lines must be preceded by ";"
 Each data file is to start with the entry SD1001 .
A data line consists of the following elements:
 ID of the variable at the beginning of the line
 Now follows the number of the variable separated by a blank or tab

Then follows the value of the variable separated by a blank or tab
Variable ID Variable type
FS Flags
RS Integer register
QA Floating-point registers
SD1001
; Data File - Jetter AG
;
; Registers 1000000 ... 1000005
RS 1000000 12345
RS 1000001 2
RS 1000002 -1062729008
RS 1000003 502
RS 1000004 50
RS 1000005 3
QS 1009000 3.14
;
; Flags 10 ... 13
FS 10 0
FS 11 1
FS 12 1
FS 13 0
Format
Data lines
Example