Jetter AG
Programming | 8
JVM-206-K00-O21 User Manual
25 / 32
Key code
Description
58
Select edited list object: Current element -4
59
Select edited list object: Current element -5
68
Jump to data mask "KEY TEST
69
Jump to data mask "FLASH TOOL
70
Jump to TECU settings
71
TECU: Starts calibration (wheel speed)
72
TECU: Saves calibration (wheel speed)
73
TECU: Resets counter (wheel speed)
74
TECU: Starts calibration (ground speed)
75
TECU: Saves calibration (ground speed)
76
TECU: Resets counter (ground speed)
77 … 87
Reserved for UDS client
200
Passes the ID of the pressed key to the editor
202
Passes the ID of the pressed key to the value of the object
pointer 65300
8.1.3 Physical keys (shortcuts)
Key name
Description
PWR_ON
Power supply on/off
HOME
Toggles between start screen and pool of active objects
LEFT
Sets input focus to the left
RIGHT
Sets input focus to the right
TOP
Sets input focus upwards
BOTTOM
Sets input focus down
ENTER
Exit and save shape editing mode and switch to editing
mode
ESC
Exit shape editing without saving and switch to editing mode
ISB
ISOBUS key
SK_1 … SK_n
Softkeys
