Servomotor series JHN, JHQ, and JL – User Manual
Servomotors of the JHQ series
Jetter AG
71
6 Servomotors of the JHQ series
The table below lists the tolerance of the shaft length according to DIN ISO 2768-1, Table 1, for
longitudinal dimensions of the JHQ series:
Tolerance
class
Limit deviations in mm for nominal dimension range in mm
up to
0.5
0.5
through
3
over 3
to 6
over 6
to 30
over
30 to
120
over
120 to
400
over
400 to
1000
over
1000
to
2000
over
2000
to
4000
over
4000
to
8000
f (fine)
See
below
1)
± 0.05 ± 0.05 ± 0.10 ± 0.15 ± 0.20 ± 0.30 ± 0.50
-
-
1)
: For nominal dimensions below 0.5 mm, the limit deviations must be indicated directly on the
nominal dimension.
The following illustrations of flange sizes show the dimensions in millimeters of motors equipped
with a resolver.
6.1 Flange size - JHQ12
