Servomotor series JHN, JHQ, and JL – User Manual
Installation and commissioning
Jetter AG
211
The following table shows the assignment of the cable cores of the encoder connection:
Resolver cable signal
Core color with
option S3-x.xx
Pin assignment
for option S4-x.xx
S1 ()
Brown
1
S3 (cosine-)
White
2
S4 (sine-)
Green
3
S2 (sine+)
Yellow
4
R1 (exciter )
Pink
5
R2 (exciter winding-)
Gray
6
Therm
Blue
7
Thermoswitch-
Red
8
Not assigned
9 - 12
JL1 motor, variant 2 (electrical connection S4-x.xx)
8.5.2
A few motors of the JHN2 series also have the electrical connection S4-x.xx.
The motor has two cable glands with cables for the power and encoder cables. The cable length
must be specified in the order according to the type designation S4-x.xx in meters. The ends of the
cables are fitted with connectors as shown in the figure below:
