Jetter JetControl 365MC, User Manual

Page: 12 / 148

Jetter AG Product Description | 3
User Manual – JetControl 365MC 12 / 148
■ Either 1 JX2 system bus port or 1 CAN port (CANopen)
■ 1 additional CAN port (CANopen)
■ A maximum of 16 JX3 modules can be directly added to the unit
■ Real-time clock
■ Modbus/TCP client and server
■ SD memory card
Additional options
Your JC-365MC may be equipped with additional options (see Order reference/
options [ } 15] ). You must already specify the additional options for your con-
troller when placing the order. The controller cannot be equipped with additional
features afterwards.
3.4 Status indication
LEDs indicate the communication status of the device as well as the status of the
power supply.
R E D1 D2
U1 U2
U3
U4
SD
Fig. 3: Status indication
LED Description
R State of operating system
E General error
D1 Special states
D2 State of boot loader
SD Access to SD card
U1 …
U4 Application-specific programming is possible
3.4.1 Diagnostics capabilities by means of status indication
The color and status of the LEDs provide diagnostic options for various states. In
the JetSym programming tool, diagnostics can be performed in the Hardware
Manager or via the setup window by entering the corresponding register number.
LED Status Color Description
R OFF --- No power supply or defective.
Blinking at 1
Hz Green Either the controller is still booting up, or it
does not execute the application program.
Blinking at
4 Hz Green Reset or fatal error.
ON Green Application program is being executed.
E OFF --- No error occurred.
Blinking at 1
Hz Red There is no valid OS.
Blinking at
4 Hz Red Reset, fatal error, or checking the network con-
sistency.
ON Red Error; refer to error register.