Jetter AG
Mechanical installation | 5
User Manual – JCM-501-E01
18 / 65
5.1 Requirements for the installation location
The installation location must meet the following requirements:
■
The installation location must allow air to circulate.
■
The installation location must be of sufficient size.
■
The device must be easily accessible to allow for service work.
Space required for
installation and
service
It should be possible to disconnect the connectors at any time.
70
Fig. 5:
Space requirements for installation work (in mm)
Avoiding unsuit-
able installation
locations
The following installation locations are unsuitable for mounting the device:
Unsuitable installation
location
Reason
Outdoor installation
The device must not be exposed to rain or a jet
of water. Do not use a steam jet or other such
devices to clean the device.
Installation location close to
heat-sensitive materials
The materials could become warped or mis-
shapen as a result of heat produced by the de-
vice.
Tab. 13:
Unsuitable installation locations
