Jetter JC-120MC, User Manual

Page: 270 / 634

270 Jetter AG
10 Programming
Configuration - Register description
These registers can be used to check the SET configuration and the three
received ACTUAL configurations When you have entered the GNN in
MR 2000, the controller transfers the values to the 4 register arrays.
GNN
Enter the GNN here.
Module register properties
Values 1 ... 199
Value after reset 1
SET configuration
These registers let you read the default SET configuration.
Register Command line parameter
2010 NodeID (GNN)
2011 CtrlID
2012 CtrlIDopt
2013 IpAddr
2014 IpMask
2015 Gateway
ACTUAL configuration 1
These registers let you read the first received ACTUAL configuration.
Register Command line parameter
2110 NodeID (GNN)
2111 CtrlID
2112 CtrlIDopt
2113 IpAddr
2114 IpMask
2115 Gateway
2120 Quantity
2121 MAC address high
2122 MAC address low
Introduction
MR 2000
MR 2010 ... 2015
MR 2110 ... 2123