Jette Polsterbett, Assembly Instructions Manual, Page: 16 / 17

- 16 -
SAFETY INSTRUCTIONS
ATTENTION!
Safety Instructions
When using all adjustment functions on both the bed base/ sprung wooden frame
and the headrest, ensure that no body parts/ persons/ pets or other objects become
stuck or trapped.
The J E T T E sprung wooden frames have a gas spring system that makes it easier
for you to open the bed body.
Caution !! .... If there is no mattress on the bed, the sprung wooden frame can
spring up unexpectedly quickly. Therefore, raise the sprung wooden frame before
removing the mattress.
None of the glasses/ ceramics used by J E T T E are laminated glasses/ ceramics.
Incorrect mechanical stress can cause breakage of the component in question and
pose an injury risk.
All lamps become very hot when switched on, and for this reason they must not be
touched or covered up.
None of the electrical cables for motorised adjustable sprung wooden frames and
lamps may be squashed, bent or pulled.
Because of the heat they produce, transformers must not be covered or enclosed
by objects or textiles, otherwise they pose a fire hazard.
If there is visible damage to electrical components, unusual noise, odours or smoke,
pull out the mains plug immediately and have the electrical component examined by
a skilled electrician. If it is a warranty case, inform your dealer (furniture store).
Only a skilled electrician may replace or repair electrical components. Conversions
or modifications to parts of the electrical subassemblies are not allowed.
Make sure that no liquid can enter electrical components, otherwise they will pose
an electric shock hazard.