JETStream jt270m, User Manual

Page: 48 / 62

42
unkey too frequently. Delay can be set from 1 to 4
seconds; the default setting is 3 seconds.
VXB (VOX inhibited when receiving):
Set Menu 49 to ON if you do not want VOX active
while the receiver is active. To avoid the receiver
keying the VOX by mistake, it is probably a good idea
to leave this setting at its default ON state.
Wide and Narrow Bandwidth Set (WidNar): Menu
50
You can set the channel bandwidth to “WIDE” or
“Narrow” using Menu 50. Set this according to your
country or radio service regulations. The default
setting is WIDE.
User-defined Keys Menu
As previously mentioned the P1, P2, P3, and Menu
keys are user programmable. While the short press of
the M key can only be changed in the programming
software, the P1, P2, and P3 keys can be programmed
using Menus 24-29.
Each of these keys has two programmable functions,
accessed by a short press (press and release) or a long
press (Press and hold for 1.5 seconds). Each of these
functions is set in one of the programmable key
menus.
Note: If you would like to change the hold time for Long Press,
you may do so using the programming software.