Step 7. Screw the racing bar (15A) into place by tightening the bolts (31), washers (32) and nuts
(06). Connect the grip pulse wires (29/29A) together. Insert the handlebar (15R/15L) into
the support tube (7R/7L) and fasten the bolts (30) and washers (05).
Step 8. Connect the top computer cable (19) and the bottom hand pulse wire (29A) to the
computer (20). Slide the computer (20) onto the computer holder on top of the handlebar
post (12) and screw (20A) them in.
Step 9. Fit the pedal (22R/22L) onto the pedal tube (08R/08L) using the bolts (33), knobs (18)
and washers (32).
- 4 -
15A
15R
20
20A
19
32
6
15L
30
5
31
7R
33
22L
22R
32
18
18
32
7L
