JETStream 4" J-FORCE GEN II JF4X22, Product Instructions, Page: 12 / 36

12 PI-190 June 2019
Section 2: Product Description
The 4” J-Force
TM
Gen II is a self-powered rotating nozzle that uses up to 6
JS2 or P2TCS nozzles.
The 4” J-Force Gen II has many features, including:
• Spins on a film of high pressure water and has no ball bearings to
replace. No oil or grease is needed for lubrication.
• Comes equipped with an eddy-current braking system which controls
rotation speed for maximum cleaning power and minimum wear.
• Completely field repairable (in less than 5 minutes)
• 10° forward, 100° radial, 135° rearward nozzle angles
• Designed to easily navigate and clean 4” pipes with 90° bends.
WARNING W W This system contains several high-energy, rare-earth
magnets that produce a magnetic field. Persons with a pacemaker or
other electronic medical device must use extreme caution when handling
or in close proximity. It is recommended that a minimum distance of 6
inches (152mm) be maintained at all times between the J-Force and any
electronic medical devices.
CAUTION
The use of gloves is recommended when handling the tool
after operation as the body may reach temperatures greater than 200 F.