JetStor FX Series, Hardware Manual

Page: 52 / 117

36

Align the host card to the slot to be installed and then push all the way into the controller
cage until hear a “click” sound and make sure the host card is well connected with the
connector in the controller module.
Figure 3-13 Procedures of Installing the Host Card



Repeat procedures above if there are other host adapter cards need to be installed.
You must install GBIC (s) for the Fibre Channel or 10GbE host cards before
connecting the cables from the
JetStor FX
to the host sides.
Install the controller module into the system chassis if the host card installation
completed.
Confirm the Host Card Installation
If the host card is installed properly, you can check the host card connections status in
SANOS UI ->
HOST CONNECTIVITY -> Overview . If your host cards are properly installed, the
status column will show the connection speed.