Jetson V6 LIMITED, Manual

Page: 6 / 16

MAT SENSOR
There are four sensors under the mat. Never remove the mat or you will revoke the warranty. When
the V6 is turned on and you step on, it will automatically adjust to the balance mode. Please don’t
step outside the outlined mat. Please do not put items on the mat; that will prevent the V6 from
switching off, which could cause a collision. The device will not move without putting pressure on
at least one sensor.
CHARGING BATTERY
Your V6 comes with a rechargeable lithium-ion battery. Always use the provided charger only.
Before your first ride you must fully charge the V6 - charge for 3 hours. For every ride after,
charge your V6 until it is fully charged, and NOT LONGER. Do not leave any chargers plugged in
overnight, or leave it plugged in past the charge time.
1. Plug one end of the power cord into a grounded AC outlet and the other into the
V6’s Charging Port. The red charging light on the charger unit will turn on.
2. The red light will turn green once fully charged. Recharge the V6 after each use.
(Please note: Always plug the charger into the wall first before the device. If the wall outlet doesn’t
have power and you plug the charger into the device first, it will light green, even if the battery is
not full. So always plug into the wall first to make sure there is power.)
THE CHARGER OFFERS A CHARGING STATUS ON THE TOP OF THE CHARGER:
Charging Light Red
battery is charging.
Charging Light Green charging is complete.
Stop riding immediately if the V6 displays low power.
Don’t use the hoverboard if the battery emits strange odors, overheats, or begins leaking. If
the battery does leak, do not touch any leaking materials, as the battery contains dangerous
substances. Do not open the battery and do not insert anything into the battery.
Only use the provided charger for the V6. Do not charge the battery if it has over-discharged. It
should be discarded for your safety.
BATTERY LEVEL INDICATOR LIGHT
An LED indicator on the top of the device is used to indicate battery level. When the light is green,
it means the device has over 50% battery power. When the light is yellow, there is 49%-20% battery
power remaining. When the light turns red, there is less then 20% battery power remaining and
should be charged as soon as possible. Always check the power level before using the V6 to
ensure there is enough power.
Warning: If battery power goes below 10%, the device will automatically turn off for your safety.