Jetson SLATE, Manual

Page: 11 / 20

11
Your Slate comes with a built-in rechargeable lithium ion battery. Always
use the provided charger only. The Charging Port is located on the right
side of the Slate directly opposite of the Kickstand. Please remember to
cover the Charging Port when you are done charging the Slate. Before
your first ride you must fully charge the Slate - charge for 4 hours for the
first 3 times you use it. For every ride after, charge your Slate until it is
fully charged, and NOT LONGER. Do not leave any chargers plugged in
overnight, or leave it plugged in past the charge time.
1. Plug one end of the power cord into a grounded AC outlet and
the other into the Slate’s Charging Port. The red charging light on the
charger unit will turn on.
CHARGING THE BATTERY
2. The red light will turn green once fully charged. Recharge the Slate
after each use.
(Please note: Always plug the charger into the wall first before the
device. If the wall outlet doesn’t have power and you plug the charger
into the device first, it will light green, even if the battery is not full. So
always plug into the wall first to make sure there is power.)
THE CHARGER OFFERS A CHARGING STATUS ON THE TOP OF THE
CHARGER:
CHARGING LIGHT RED: Battery is charging.
CHARGING LIGHT GREEN: Charging is complete.
Charge the battery when the Slate displays low power. When you are
done charging the battery, remember to cover the Charging Port.
Don’t use the Slate if the battery emits strange odors, overheats, or
begins leaking. If the battery does leak, do not touch any leaking
materials, as the battery contains dangerous substances. Do not open
the battery and do not insert anything into the battery.
Do not charge the battery if it has over-discharged. It should be
discarded for your safety. Do not turn on the Slate while it is charging.