Jetson SATURN, Manual

Page: 7 / 16

Stem Clamp
and Knob
7
ADJUSTING THE HANDLEBAR
To Adjust the Handlebar, push out the Stem Clamp and turn the
Knob counterclockwise to loosen (make sure you do not remove
the Knob completely.) Press the Push Button on the Stem in. Lift
or lower the Handlebar until it clicks and suits the height of the
rider. Once fully adjusted turn the Knob clockwise and push in
the Stem Clamp to secure.
HOW TO CHANGE THE BATTERIES
The Saturn has LED lights located in the Stem, the Deck, and the
Wheels. In order to have the Stem and Deck illuminate, you will
need to add a total of 6 AAA batteries; 3 AAA batteries to the
Stem and 3 AAA batteries to the bottom of the Deck.
Use a screw driver to open the battery box at the bottom of the
Stem and place batteries inside. Close the battery box door with
the screw and screwdriver. The LED Lights in the Stem are now
ready to be turned on. In order to illuminate the Stem, you will
need to turn on the Stem LED Light Switch located on the front
of the Saturn near the base of the Stem.