Jetson JRBSKT-BLK, Manual

Page: 12 / 32

10
3. WHILE HOLDING THE BRACKET IN POSITION,
PLACE THE FENDER BACK OVER THE WHEEL
WITH THE HOLE IN THE FENDER TAB OVER
THE ALIGNED HOLES IN THE BIKE FRAME AND
BASKET BRACKET.
4. REPLACE THE WASHER ON THE BOLT STEM,
AND INSERT THE BOLT THROUGH THE
ALIGNED HOLES. INSERT AND TIGHTEN THE
BOLT, FASTENING THE BASKET BRACKET AND
FENDER TO THE BIKE FRAME (OR NUT ON THE
BACKSIDE, IF YOUR MODEL HAS ONE), BY
TURNING IT CLOCKWISE WITH THE ALLEN KEY.
WARNING: DO NOT OVERTIGHTEN THE BOLT.
OVERTIGHTENING CAN CAUSE THE FENDER
TO CRACK.
5. CHECK THAT THE BRACKET AND FENDER
ARE SECURE.
WASHER
(SOME BIKE MODELS)
BOLT
BRACKET
REAR FENDER TAB
REAR FENDER