13
CHARGING THE BATTERY
Your Journey comes with a built-in rechargeable lithium battery. Always use
the provided charger only. Before your first ride you must fully charge the
Journey. Charge for 12 hours for the first 3 times you use it. The Charging Port
is located on the left side of the frame near the Handlebar Stem (see digram
on P. 4 for reference). For every ride after, charge your Journey until it is fully
charged, and NOT LONGER. Do not leave any chargers plugged in overnight,
or leave it plugged in past the charge time.
1. Plug one end of the power cord into a grounded AC outlet and the other
into the Journey’s charging port. The red charging light on the charger unit
will turn on.
2. The red light will turn green once fully charged. Recharge the Journey after
each use.
(Please note: Always plug the charger into the wall first before the device. If
the wall outlet doesn’t have power and you plug the charger into the device
first, it will light green, even if the battery is not full. So always plug into the
wall first to make sure there is power.)
THE CHARGER OFFERS A CHARGING STATUS ON THE TOP OF THE
CHARGER:
CHARGING LIGHT RED:
Battery is charging.
CHARGING LIGHT GREEN:
Charging is complete.
Charge the battery when the Journey displays low power. When you are
done charging the battery, remember to cover the Charging Port.
Don’t use the Journey if the battery emits strange odors, overheats, or begins
leaking. If the battery does leak, do not touch any leaking materials, as the
battery contains dangerous substances. Do not open the battery and do not
insert anything into the battery.
Only use the provided charger for the Journey. Do not charge the battery if
it has over-discharged. It should be discarded for your safety. Do not turn on
the Journey while it is charging.
