10
TO RESIZE THE BRACKETS:
1. REMOVE THE BRACKETS FROM THE HOVERBOARD.
2. LOCATE THE TWO BOLTS GOING THROUGH THE SIDES OF EACH BRACKET;
THEY ARE SECURED ON THE OTHER SIDE BY A WASHER AND BOLT. (2 PER BRACKET, 4 TOTAL)
3. USING THE ALLEN KEY TIP OF THE 2-BIT TOOL TO HOLD ONE OF THE BOLTS STEADY, LOOSEN AND
REMOVE THE NUT OFF THE END OF THE BOLT BY TURNING IT COUNTERCLOCKWISE WITH THE WRENCH.
REMOVE THE WASHER AND SLIDE THE BOLT OUT OF THE BRACKET. SET THE 3 PIECES OF HARDWARE ASIDE.
NUT
WRENCH
WASHER
BOLT
2-BIT TOOL
BOLT
Summary of Contents for JKAR19-BLK
