Jetson JJRNY-BLU, Manual

Page: 34 / 40

32
ENTER SETTINGS MENU
• TO ENTER SETTINGS, PRESS THE “PLUS” AND “MINUS“ BUTTONS AT THE SAME TIME FOR THREE SECONDS.
• TO SCROLL THROUGH SETTINGS USE EITHER THE “PLUS” OR “MINUS“ BUTTONS.
• PRESS THE POWER BUTTON TO ENTER SETTING, AND “PLUS” AND “MINUS“ BUTTONS TO MOVE TO SELECTED SETTING.
ONCE YOU HAVE MADE YOUR SELECTION PRESS THE POWER BUTTON; IT WILL LOCK IN YOUR SETTING AND PRESS THE
"PLUS" AND "MINUS" BUTTONS AT THE SAME TIME TO RETURN TO THE SETTINGS MENU.
ADJUSTING BRIGHTNESS OF THE LCD DISPLAY
• IN SETTINGS MENU, SELECT P01.
• PRESS THE POWER BUTTON TO BRING UP LCD DISPLAY BACKLIGHT SETTING. USE “PLUS” OR “MINUS“ BUTTONS TO
SELECT PREFERRED OPTION.
• THE BACKLIGHT OPTIONS RANGE FROM 0 (NO BACKLIGHT) TO 9 (THE BRIGHTEST OPTION). THE FACTORY DEFAULT
SETTING FOR THE LCD DISPLAY IS 8.
• ONCE YOU HAVE PREFERRED OPTION SELECTED, PRESS THE POWER BUTTON TO EXIT.
CHANGING BETWEEN MILES PER HOUR AND KILOMETERS PER HOUR
• IN SETTINGS MENU, SELECT P02.
• PRESS THE POWER BUTTON TO BRING UP MPH/KMH SETTINGS. USING “PLUS” OR “MINUS“ BUTTONS TO SELECT
PREFERRED OPTION.
• THE OPTIONS RANGE FROM “0” FOR KMH TO “1” FOR MPH. THE FACTORY DEFAULT SETTING IS 0.
• ONCE YOU HAVE PREFERRED OPTION SELECTED, PRESS THE POWER BUTTON TO EXIT.
PLEASE CONTACT JETSON SUPPORT IF YOUR STATUS DISPLAY IS SHOWING ANY OF THESE PROMPTS:
• P04 - MOTOR HALL SENSOR FAILURE
• P05 - MOTOR FAULT
• P06 - TURN-KEY FAILURE
• P07 - BRAKE FAILURE
• P08 - POWER SENSOR FAILURE
• P09 - MOTOR UNDER-VOLTAGE PROTECTION