The optimal body position when using the Aqua is necessary to
achieve the most efficient power output.
-see figure for the correct position of the Aqua.
WARNING:
Do not dive deeper than you normally would when
snorkeling, so you can get back to the surface safely.
• There are 3 speed modes of the Aqua, always start from
1
st
gear and increase gradually.
• Always lock the Safety Switch, when out of the water.
Gear
Dis. Current
(A)
Speed
(m/s)
Run Time
(Min)
Thrust
(kg)
1
8
0.6
35
3
2
16
1
20
5
3
25
1.5
12
8
2.2
Do’s & Dont’s
DO’S:
• Take your Aqua into the pool, lake or ocean and enjoy the
ride! Once fully assembled, the Aqua floats and is completely
waterproof so you have no need to worry.
• Give your Aqua a thorough rinse with fresh water after using it.
This ensures that the unit will remain clean and free of corrosion.
• Let it rip! The Aqua’s speed will remain constant until the battery
is drained.
• Wait and release the switch if you see four battery light
indicators flashing at the same time. The Aqua will reset and is
finished when the lights go out.
DONT’S:
• Expose the battery pack underwater. This will damage the
internal parts beyond repair.
• Use the battery pack if the outer case is broken. Contact Jetson
Support for assistance.
• Open the Aqua if the motor isn’t working. Give it a thorough rinse
with fresh water first to dislodge any sand particles or crystals
that might’ve gotten stuck in there.
