NEUTRAL
TURN RIGHT
TURN LEFT
3.1
Riding the Vega
3.2
Turning the Lights On
3. Make Moves
Please Note
: The Connector should always be connected while riding.
Follow these 3 simple steps...
1. Connect the Rear Seat Wire
to the Vega Charging Port.
2. Power On Vega - Double
press the power button to set
the lights to KART mode.
3. Lights are motion activated,
and will turn off when still.
• The default lighting mode will display when the Force
and Vega are both connected and powered on.
• Short press the power button to switch between
different lighting effects.
3.3
Riding the Force
FORWARD
PUSH DOWN
BRAKE / REVERSE
PULL UP
TURN RIGHT
TURN LEFT
Note:
If the Vega is not leveled when you turn it on, the Force will go
forward or backward immediately. Tighten all screws and locking
nuts before each ride to ensure they are tight.
1. Place the Force on a flat surface with the Vega turned off.
2. Carefully take a seat and place your feet on the Foot Rest.
3. Make sure the Vega is leveled.
4. Now it’s time to turn on your Vega.
